From: matt netw (mattnetw@gmail.com)
Date: Wed Mar 14 2007 - 12:21:40 ART
Thanks Bob,
I have had the opportunity to prove this configuration into a 3840, and
result is the correct, it seem to be a issue with the IOS/platform, as you
say well.
Thanks for your explanation and for your time,
Matt.
2007/3/14, Bob Sinclair <bsinclair@netmasterclass.net>:
>
> matt netw wrote:
> > Hi GS,
> >
> > I have a confused issue, when I config the next map-class frame-relay:
> >
> > map-class frame-relay FRMAP1
> > frame-relay cir 128000
> > frame-relay mincir 48000
> > frame-relay adaptive-shaping interface-congestion 10
> >
> > Once the map-class is configured, I run the show running-config command
> and
> > only show me the next:
> >
> >
> Hi Matt,
>
> Looks like it might be an issue with your IOS/platform to me. I get
> the expected behavior when I paste your config into a 3640 running
> c3640-jk9o3s-mz.124-5b:
>
> Router#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> Router(config)#map-class frame-relay FRMAP1
> Router(config-map-class)# frame-relay cir 128000
> Router(config-map-class)# frame-relay mincir 48000
> Router(config-map-class)#$y adaptive-shaping interface-congestion
> 10
> Router(config-map-class)#end
> Router#sh run | b class
> map-class frame-relay FRMAP1
> frame-relay cir 128000
> frame-relay mincir 48000
> frame-relay adaptive-shaping interface-congestion 10
>
> --
> HtH,
>
> Bob Sinclair CCIE 10427 CCSI 30427
> www.netmasterclass.net
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART