From: Marvin Greenlee (marvin@ipexpert.com)
Date: Tue Mar 13 2007 - 14:15:11 ART
Depending on what area the loopback is in, you may also be able to use the
area range command. If you just want to get it into OSPF, redistribute
connected may be another option.
Marvin Greenlee, CCIE #12237 (R&S, SP, Sec)
Senior Technical Instructor - IPexpert, Inc.
"When Will You Be an IP Expert?"
marvin@ipexpert.com
http://www.IPexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Tao
Yang
Sent: Tuesday, March 13, 2007 7:50 AM
To: Cisco certification
Subject: In OSPF, how to let router advertises the loopback address with
their actual masks with out changing the network type
When ospf advertise the loopback interface address,
the default netmask is 32, if we don't change the network type to
point-to-point.
Is there any other method, we can let the router advertise the
loopback address with the actual netmask?
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART