From: Darby Weaver (darbyweaver@yahoo.com)
Date: Tue Mar 13 2007 - 12:15:04 ART
Thanks Narbik,
The point is clear.
Someone once asked me:
"Would you rather pass on a re-grade, or would just
prefer to pass the on the first grade"...
Or something like that.
The CCIE Lab language is simply not as tricky as some
may have us believe.
Truthfully, from my experience, my failed attempts
were simply from not enough lab hours on the racks.
Most people might agree as well. Well, aside from
just not taking the time to read the configuration
guides at least once from CCO...
--- Narbik Kocharians <narbikk@gmail.com> wrote:
> Brian, you are 100 percent correct, but i did not
> say that you SHOULD only
> know the simple way, i said you should configure the
> simple method first
> before doing the 007 method.
> Have a cup of coffee and relax.
>
>
> On 3/13/07, briapolo@wm.com <briapolo@wm.com> wrote:
> >
> > nm, I have found it:
> >
> > R4(config)#printer CCIE line ?
> > <0-198> TTY number
> > aux Auxiliary line
> > console Primary terminal line
> > tty Terminal controller
> > vty Virtual terminal
> > x/y Slot/Port for Modems
> > x/y/z Slot/Subslot/Port for Modems
> >
> >
>
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART