From: Narbik Kocharians (narbikk@gmail.com)
Date: Mon Mar 12 2007 - 23:05:18 ART
Configure this on both routers and remember that this is available on P2P
and some Multipoint configurations. When it comes to frame-relay, it only
works on P2P, but it also works in Multipoint ISDN configuration as well. I
think it's a better solution than configuring snap shot routing.
On 3/12/07, huangyinxiao@gmail.com <huangyinxiao@gmail.com> wrote:
>
> Hi everyone,
>
> The senario described as follows:
>
> R1----R2 connected through frame-relay, I want to let R1 donot
> reconstructe it's RIP database when network convergence and interface
> flapping.
>
>
> I think RIP triggered mechanism would solve this problem. So I have done
> command 'ip rip triggered' on the interface of R1 which connected to R2.
>
> But, after this, I found R1 still send and receive RIP updates through the
> interface of R1 connected to R2 when I did debug on R1. It seems the command
> did not work. And when I done this command on R1 and R2, the two router
> didn't not send and receive updates.
>
> So should I configure on both routers or only R1?
>
> Can anyone give me solutions or any suggestions?
>
> Thanks,
>
> Laurence
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Narbik Kocharians CCIE# 12410 (R&S, SP, Security) CCSI# 30832 Network Learning, Inc. (CCIE class Instructor) www.ccbootcamp.com (CCIE Training)
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART