CCIE RSVP requirements

From: iyux2000@gmail.com
Date: Mon Mar 12 2007 - 06:53:50 ART

• Next message: mmmmmmmmmmmm mmmmmmmmmmmm: "Re: IPv6 Link local addressing and FR maps"
• Previous message: Venkataramanaiah.R: "MSTP/RSTP Convergence issue"
• Next in thread: Huang Laurence: "Re: CCIE RSVP requirements"
• Maybe reply: Huang Laurence: "Re: CCIE RSVP requirements"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello group,

     I have serveral questions about configuring RSVP.

    1. For configuring RSVP over FR, is only one command "ip rsvp bandwidth" enough to enable RSVP? Do i need to enable "traffic-shaping".
    2. If need to configure RSVP under subinterfaces, which commands are needed?
    3. If topology is as follows:
        R1(multipoint)
       / \
      / \
     R2 R3
(p-to-p) (p-to-p)
  
     Do i need to configure RSVP on every interface?
Or only enablint RSVP on R1 multipoint interface?

Thank you for your reply.

• Next message: mmmmmmmmmmmm mmmmmmmmmmmm: "Re: IPv6 Link local addressing and FR maps"
• Previous message: Venkataramanaiah.R: "MSTP/RSTP Convergence issue"
• Next in thread: Huang Laurence: "Re: CCIE RSVP requirements"
• Maybe reply: Huang Laurence: "Re: CCIE RSVP requirements"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART