From: Muhabat (muhabat@gmail.com)
Date: Mon Mar 12 2007 - 06:04:23 ART
Thanks all for providing a lot of useful information. My issue is solved. It
was simple to reboot all the 5 devices and every thing is now working
normally.
But the links and discussion provide me good information.
Thanks again for helping.
Best Regards,
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Chris Riling
Sent: Sunday, March 11, 2007 8:26 PM
To: Cisco certification
Subject: Re: HSRP error message
My shot in the dark; would it be caused by having an IP on a physical
interface that's on a different subnet than the virtual? Whenever I
configure HSRP I always use .1 in the subnet as a virtual address, .2 as the
first physical interface, and .3 as the standby router's physical interface,
and I've never had an issue...
Chris
On 3/11/07, Subhash P <subhashccie@gmail.com> wrote:
>
> Sean, I don't think you are right on your opinion. I've got a similar
> setup
> and is working fine. Need to check the configuration on the uplink
> between
> the two switches. As suggested earlier, may be the native vlan is not
> matching on both sides.
>
> Regards,
> subhash.
>
>
> On 3/11/07, Sean C. <Upp_and_Upp@hotmail.com> wrote:
> >
> > Hi Muhabat,
> >
> > Not sure, but is it because you're using the same group number on each
> > interface? I'm not sure if HSRP Group numbers are local to an interface
> > or
> > if they need to be unique to the device.
> >
> >
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hiap_c
/ch20/haiphsrp.htm#wp1046229
> >
> > HTH,
> > Sean #17085
> >
> > IOW:
> > Configuration on DLS1
> > !
> > interface Vlan10
> > standby 10 ip 172.16.10.1
> > standby 10 priority 150
> > standby 10 preempt
> > !
> > interface Vlan20
> > standby 20 ip 172.16.20.1
> > standby 20 priority 150
> > standby 20 preempt
> > !
> > interface Vlan30
> > standby 30 ip 172.16.30.1
> > standby 30 preempt
> > !
> > interface Vlan40
> > standby 40 ip 172.16.40.1
> > standby 40 preempt
> > !!
> > Configuration on DLS2
> > interface Vlan10
> > standby 10 ip 172.16.10.1
> > standby 10 preempt
> > !
> > interface Vlan20
> > standby 20 ip 172.16.20.1
> > standby 20 preempt
> > !
> > interface Vlan30
> > standby 30 ip 172.16.30.1
> > standby 30 priority 150
> > standby 30 preempt
> > !
> > interface Vlan40
> > standby 40 ip 172.16.40.1
> > standby 40 priority 150
> > standby 40 preempt
> >
> > ----- Original Message -----
> > From: "Muhabat" <muhabat@gmail.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Sunday, March 11, 2007 7:38 AM
> > Subject: HSRP error message
> >
> >
> > Hi GS,
> >
> >
> >
> > I have configured HSRP b/w two switches using dynamips, NM-16esw module.
> >
> >
> >
> > Configuration on DLS1
> >
> >
> >
> > interface Vlan1
> >
> > ip address 172.16.1.103 255.255.255.0
> >
> > standby 1 ip 172.16.1.1
> >
> > standby 1 priority 150
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan10
> >
> > ip address 172.16.10.3 255.255.255.0
> >
> > standby 1 ip 172.16.10.1
> >
> > standby 1 priority 150
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan20
> >
> > ip address 172.16.20.3 255.255.255.0
> >
> > standby 1 ip 172.16.20.1
> >
> > standby 1 priority 150
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan30
> >
> > ip address 172.16.30.3 255.255.255.0
> >
> > standby 1 ip 172.16.30.1
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan40
> >
> > ip address 172.16.40.3 255.255.255.0
> >
> > standby 1 ip 172.16.40.1
> >
> > standby 1 preempt
> >
> > !
> >
> >
> >
> > Configuration on DLS2
> >
> >
> >
> > interface Vlan1
> >
> > ip address 172.16.1.104 255.255.255.0
> >
> > standby 1 ip 172.16.1.1
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan10
> >
> > ip address 172.16.10.4 255.255.255.0
> >
> > standby 1 ip 172.16.10.1
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan20
> >
> > ip address 172.16.20.4 255.255.255.0
> >
> > standby 1 ip 172.16.20.1
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan30
> >
> > ip address 172.16.30.4 255.255.255.0
> >
> > standby 1 ip 172.16.30.1
> >
> > standby 1 priority 150
> >
> > standby 1 preempt
> >
> > !
> >
> > interface Vlan40
> >
> > ip address 172.16.40.4 255.255.255.0
> >
> > standby 1 ip 172.16.40.1
> >
> > standby 1 priority 150
> >
> > standby 1 preempt
> >
> > !
> >
> >
> >
> > I am getting following error messages on both switches.
> >
> >
> >
> >
> >
> > on dls1
> >
> >
> >
> > *Mar 1 02:00:48.667: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
> > virtual
> > IP address 172.16.20.1 is different to the locally configured address
> > 172.16.10.1
> >
> >
> >
> > dls1#
> >
> > *Mar 1 02:01:18.715: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
> > virtual
> > IP address 172.16.20.1 is different to the locally configured address
> > 172.16.10.1
> >
> > dls1#
> >
> >
> >
> > on dls2
> >
> >
> >
> > dls2#
> >
> > *Mar 1 02:00:15.215: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
> > virtual
> > IP address 172.16.20.1 is different to the locally configured address
> > 172.16.10.1
> >
> > dls2#
> >
> > *Mar 1 02:00:49.131: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
> > virtual
> > IP address 172.16.20.1 is different to the locally configured address
> > 172.16.10.1
> >
> > dls2#
> >
> >
> >
> > Any input will be of great help.
> >
> >
> >
> >
> >
> > Best Regards,
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:51 ART