From: Sean C. (Upp_and_Upp@hotmail.com)
Date: Sun Mar 11 2007 - 18:14:37 ART
Very good. Just a suggestion - haven't tried it myself. No probs...
Sean
----- Original Message -----
From: Subhash P
To: Sean C. ; Cisco certification
Sent: Sunday, March 11, 2007 9:13 AM
Subject: Re: HSRP error message
Sean, I don't think you are right on your opinion. I've got a similar setup
and is working fine. Need to check the configuration on the uplink between
the two switches. As suggested earlier, may be the native vlan is not
matching on both sides.
Regards,
subhash.
On 3/11/07, Sean C. <Upp_and_Upp@hotmail.com> wrote:
Hi Muhabat,
Not sure, but is it because you're using the same group number on each
interface? I'm not sure if HSRP Group numbers are local to an interface
or
if they need to be unique to the device.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cg/hia
p_c/ch20/haiphsrp.htm#wp1046229
HTH,
Sean #17085
IOW:
Configuration on DLS1
!
interface Vlan10
standby 10 ip 172.16.10.1
standby 10 priority 150
standby 10 preempt
!
interface Vlan20
standby 20 ip 172.16.20.1
standby 20 priority 150
standby 20 preempt
!
interface Vlan30
standby 30 ip 172.16.30.1
standby 30 preempt
!
interface Vlan40
standby 40 ip 172.16.40.1
standby 40 preempt
!!
Configuration on DLS2
interface Vlan10
standby 10 ip 172.16.10.1
standby 10 preempt
!
interface Vlan20
standby 20 ip 172.16.20.1
standby 20 preempt
!
interface Vlan30
standby 30 ip 172.16.30.1
standby 30 priority 150
standby 30 preempt
!
interface Vlan40
standby 40 ip 172.16.40.1
standby 40 priority 150
standby 40 preempt
----- Original Message -----
From: "Muhabat" < muhabat@gmail.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, March 11, 2007 7:38 AM
Subject: HSRP error message
Hi GS,
I have configured HSRP b/w two switches using dynamips, NM-16esw module.
Configuration on DLS1
interface Vlan1
ip address 172.16.1.103 255.255.255.0
standby 1 ip 172.16.1.1
standby 1 priority 150
standby 1 preempt
!
interface Vlan10
ip address 172.16.10.3 255.255.255.0
standby 1 ip 172.16.10.1
standby 1 priority 150
standby 1 preempt
!
interface Vlan20
ip address 172.16.20.3 255.255.255.0
standby 1 ip 172.16.20.1
standby 1 priority 150
standby 1 preempt
!
interface Vlan30
ip address 172.16.30.3 255.255.255.0
standby 1 ip 172.16.30.1
standby 1 preempt
!
interface Vlan40
ip address 172.16.40.3 255.255.255.0
standby 1 ip 172.16.40.1
standby 1 preempt
!
Configuration on DLS2
interface Vlan1
ip address 172.16.1.104 255.255.255.0
standby 1 ip 172.16.1.1
standby 1 preempt
!
interface Vlan10
ip address 172.16.10.4 255.255.255.0
standby 1 ip 172.16.10.1
standby 1 preempt
!
interface Vlan20
ip address 172.16.20.4 255.255.255.0
standby 1 ip 172.16.20.1
standby 1 preempt
!
interface Vlan30
ip address 172.16.30.4 255.255.255.0
standby 1 ip 172.16.30.1
standby 1 priority 150
standby 1 preempt
!
interface Vlan40
ip address 172.16.40.4 255.255.255.0
standby 1 ip 172.16.40.1
standby 1 priority 150
standby 1 preempt
!
I am getting following error messages on both switches.
on dls1
*Mar 1 02:00:48.667: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
virtual
IP address 172.16.20.1 is different to the locally configured address
172.16.10.1
dls1#
*Mar 1 02:01:18.715: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
virtual
IP address 172.16.20.1 is different to the locally configured address
172.16.10.1
dls1#
on dls2
dls2#
*Mar 1 02:00:15.215: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
virtual
IP address 172.16.20.1 is different to the locally configured address
172.16.10.1
dls2#
*Mar 1 02:00:49.131: %HSRP-4-DIFFVIP1: Vlan10 Grp 1 active routers
virtual
IP address 172.16.20.1 is different to the locally configured address
172.16.10.1
dls2#
Any input will be of great help.
Best Regards,
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART