From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Sat Mar 10 2007 - 10:28:20 ART
Hi everyone,
I'm having a problem trying to establish adjacency between a fastethernet of
R6 with fastethernet of routers R4 and R5.
The topology is R6 have an IP address of 34.1.0.6/24 and is on the same
segment of R4 (34.1.0.4/24) and R5 (34.1.0.5/24)
like a hub and spoke scenarios but with ethernet interfaces.
R4 and R5 can establish neighbor with no problems but R6 can't. Layer2
connectivity is working just fine.
On R6 I saw that both neighbors are listed in Init state with command:
show clns neighbors
If someone can help me or give me some ideas because I've tried a lot of
different ways to get this working properly, MTU is fine, They are on the same
NET,
with Level-1 configuration under the interface and since it's an ethernet I
guess mapping is not necessary.
Thanks,
Andy
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART