From: David Prall (dcp@dcptech.com)
Date: Thu Mar 08 2007 - 21:26:37 ART
The NM-16AM-V2 is a modem card. You are dialing out to a modem connected on
the console of the other router?
David
-- http://dcp.dcptech.com> -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On > Behalf Of cyrus.mgh@gmail.com > Sent: Thursday, March 08, 2007 7:18 PM > To: ccielab@groupstudy.com > Subject: reverse telnet with NM-16AM-V2 problem > > Hi > I have a problem with reverse telnet on NM-16AM-V2 that I > filled to slot1 of my 2621XM router. > I cannot reverse telnet successfully to another router via > console port. > here is my running config > ! > ip host R1 2033 7.7.7.7 > no ftp-server write-enable > ! > ! > interface Loopback0 > ip address 7.7.7.7 255.255.255.0 > ! > ! > line con 0 > line 33 48 > no exec > transport input all > line aux 0 > line vty 0 4 > ! > and when i try to telnet and run debug > > Router#telnet r1 /debug > Trying R1 ( 7.7.7.7, 2033)... Open > > [TN: received WILL ECHO (1)] > > [TN: sent DO ECHO (1)] > > [TN: received WILL SUPPRESS-GA (3)] > > [TN: sent DO SUPPRESS-GA (3)] > > [TN: received DO TTY-TYPE (24)] > > [TN: sent WONT TTY-TYPE (24)] > > [TN: received DO WINDOW-SIZE (31)] > > [TN: sent WILL WINDOW-SIZE (31)] > > [TN: Sent SB NAWS 80 24] > [TN: received DONT TTY-TYPE (24)] > > > after that it freezes,it is not show another router's prompt > and I can just type any character > > I really frustrated and don't know what to do. > > > thanks a lot for your help and kindness > > > Cyrus > > ______________________________________________________________ > _________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART