From: Marvin Greenlee (marvin@ipexpert.com)
Date: Mon Mar 05 2007 - 16:43:58 ART
In general, it's usually not that they specifically remove command options,
or syntax information, but individual IOS versions may vary as far as what
they will support.
RFCs have always been fair game when they have been relevant to the track.
RFC 1918 and 3330, for example, used to be explicitly listed on the SP
blueprint. Most people are familiar with 1918, but 3330 is not as well
known. It's definitely one that would be relevant to the track. RFC 2827,
for example, is explicitly listed on the security lab blueprint, but could
also apply to service provider environments.
There are often multiple ways that a task can be achieved. Successfully
navigating through a CCIE lab usually requires knowing multiple methods to
complete a specific task.
Marvin Greenlee, CCIE #12237 (R&S, SP, Sec)
Senior Technical Instructor - IPexpert, Inc.
"When Will You Be an IP Expert?"
marvin@ipexpert.com
http://www.IPexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
sheherezada@gmail.com
Sent: Monday, March 05, 2007 5:56 AM
To: Suzan S.
Cc: ccielab@groupstudy.com
Subject: Re: LAB exam SP
Some routers may have help disabled for some command subsets or even
some configuration options may be disabled (sorry, can not disclsose
examples). One idea is to check the syntax on another router from the
lab.
And yes, I had one question that specifically referred to a RFC I did
not know. There was no mention about this RFC in the doc CD (double
checked after I exited the lab), so this was not fair.
Another dirty trick is that they may ask things with very shady
completion criteria (think of optimization or something), so actually
you have no clue except your best practice knowledge. For one of
these questions I confirmed my understanding with the proctor twice,
got two different answers, and finally ended up with no points.
Cheers,
Mihai
CCIE #16616
On 3/1/07, Suzan S. <suzan_ccie@yahoo.com> wrote:
> Dears,
>
> Anyone knows about the lab exam, can we use the help for each command
> and use ? to see the following command used.
>
> Do we have to know each Rfc
> number and content to configure the senarios in the lab if the service
> requested only through the Rfc number.
>
> Thank you
>
> Regards
> Suzan
>
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:50 ART