From: Thomas.W.Johnson@chase.com
Date: Fri Mar 02 2007 - 00:10:24 ART
Are using the default HSRP MAC address? And port-security keeps
err-disabling the ports?
It is a security violation when one of these situations occurs:
*The maximum number of secure MAC addresses have been added to the
address table, and a station whose MAC address is not in the address
table attempts to access the interface.
*An address learned or configured on one secure interface is seen on
another secure interface in the same VLAN.
So, you have two options. Use the standby use-bia command or use the
standby mac-address command.
Hope that helps.
Thomas Johnson
JP Morgan Chase
Global Network Implementation
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
James Russell
Sent: Thursday, March 01, 2007 8:04 PM
To: Antonio Soares; ccielab@groupstudy.com
Subject: Re: HSRP and Port Security
I have set up a similar lab, and I am not having this problem. Since
this is my first post, I will refrain from sticking my configs in here.
Antonio Soares <amsoares@netcabo.pt> wrote: Hello GS,
I'm having problems understanding why HSRP does not seem to work with
Port
Security. R4 and R6 are running HSRP and are connected to SW2 F1/0/4 and
F1/0/6 respectively. Here are the configs: <original message truncated>
---------------------------------
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives. Check it out.
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:49 ART