From: Victor Cappuccio (victor@ccbootcamp.com)
Date: Thu Mar 01 2007 - 21:29:04 ART
Hi,
I have the exact same configuration that you are running, and it is
working fine..
R1(config-router)#do show run | in netw|rip|auto-
router rip
network 192.168.0.0
no auto-summary
R1(config-router)#do show run int f0/0
Building configuration...
Current configuration : 98 bytes
!
interface FastEthernet0/0
ip address 192.168.0.1 255.255.255.252
duplex auto
speed auto
end
R2(config-router)#do show run | in netw|rip|auto-
router rip
network 4.0.0.0
network 192.168.0.0
no auto-summary
R2(config)#int lo0
R2(config-if)# interface Loopback1
R2(config-if)# ip address 4.4.1.1 255.255.255.0
R2(config-if)# !
R2(config-if)# interface Loopback2
R2(config-if)# ip address 4.4.2.1 255.255.255.0
R2(config-if)# !
R2(config-if)# interface Loopback3
R2(config-if)# ip address 4.4.3.1 255.255.255.0
R2(config-if)#
R2(config-if)#do clear ip route *
R2(config-router)#do show run int f0/0
Building configuration...
Current configuration : 140 bytes
!
interface FastEthernet0/0
ip address 192.168.0.2 255.255.255.252
ip summary-address rip 4.0.0.0 255.0.0.0
duplex auto
speed auto
end
R1(config-router)#
*Mar 2 00:15:14.090: RIP: sending v2 flash update to 192.168.0.2 via
FastEthernet0/0 (192.168.0.1)
*Mar 2 00:15:14.090: RIP: build flash update entries - suppressing null
update
*Mar 2 00:15:16.634: RIP: received v2 update from 192.168.0.2 on
FastEthernet0/0
*Mar 2 00:15:16.634: 4.0.0.0/8 via 0.0.0.0 in 1 hops
R1(config-router)#do show ip route rip
R 4.0.0.0/8 [120/1] via 192.168.0.2, 00:00:05, FastEthernet0/0
R1(config-router)#do show ip route rip
R 4.0.0.0/8 [120/1] via 192.168.0.2, 00:00:18, FastEthernet0/0
R1(config-router)#do clear ip route *
R1(config-router)#do show ip route rip
R1(config-router)#do show ip route rip
R1(config-router)#do show ip route rip
R 4.0.0.0/8 [120/1] via 192.168.0.2, 00:00:00, FastEthernet0/0
R1(config-router)#do show ip route rip
R 4.0.0.0/8 [120/1] via 192.168.0.2, 00:00:01, FastEthernet0/0
Can you show us this information, from both routers please?
show ip proto
Show ip route
Show ip rip database
Show run | in router|rip|network|auto|summa|interface
show int | in up
Thanks,
Victor Cappuccio.
Network Learning Inc - A Cisco Sponsored Organization (SO) YES! We take
Cisco Learning credits!
victor@ccbootcamp.com
http://www.ccbootcamp.com (Cisco Training and Rental Racks)
http://www.ccbootcamp.com/groupstudy.html (groupstudy member discounts!)
Voice: 702-968-5100
FAX: 702-446-8012
-----Original Message-----
>Andreson Chris wrote:
> > Hello GS,
> >
> > I am learning RIP recently and try create summary route to an other
> > Router. Both router are running version 2 with no summary
> >
> > R2 is trying to generate summary route to R1. However I can't find
the
> > any at R1. And debug message as below. Did i do something wrong? I
> > have tried use auto aummary is work but however i can't do it via
> > interface.
> >
> > Rgds Chris.
> >
> > R2#
> > *Mar 1 00:11:59.647: RIP: sending v2 flash update to 192.168.0.1 via
> > FastEthernet0/0 (192.168.0.2)
> > *Mar 1 00:11:59.651: RIP: build flash update entries - suppressing
> > null update
> >
> > 4.0.0.0/24 is subnetted, 3 subnets
> > C 4.4.1.0 is directly connected, Loopback1
> > C 4.4.2.0 is directly connected, Loopback2
> > C 4.4.3.0 is directly connected, Loopback3
> > 192.168.0.0/30 is subnetted, 1 subnets
> > C 192.168.0.0 is directly connected, FastEthernet0/0
> >
> >
> > R2#
> >
> >
> > The design is very simple
> >
> > fa0/0 192.168.0.0/30 fa0/0
> > R1 ============R2 lo1 4.4.1.1/24
> > lo2 4.4.2.1/24
> > lo3 4.4.3.1/24
> >
> > This is R1 config
> >
> > interface FastEthernet0/0
> > ip address 192.168.0.1 255.255.255.252
> > duplex auto
> > speed auto
> > !
> > interface FastEthernet0/1
> > no ip address
> > shutdown
> > duplex auto
> > speed auto
> > !
> > router rip
> > version 2
> > network 192.168.0.0
> > no auto-summary
> > !
> > This is R2 config
> >
> > interface Loopback1
> > ip address 4.4.1.1 255.255.255.0
> > !
> > interface Loopback2
> > ip address 4.4.2.1 255.255.255.0
> > !
> > interface Loopback3
> > ip address 4.4.3.1 255.255.255.0
> > !
> > interface FastEthernet0/0
> > ip address 192.168.0.2 255.255.255.252
> > ip summary-address rip 4.0.0.0 255.0.0.0
> > duplex auto
> > speed auto
> > !
> > interface FastEthernet0/1
> > no ip address
> > duplex auto
> > speed auto
> > !
> > router rip
> > version 2
> > passive-interface default
> > network 4.0.0.0
> > network 192.168.0.0
> > neighbor 192.168.0.1
> > no auto-summary
> >
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:49 ART