From: Melwani, Manoj J [CCC-OT_IT] (melwanim@citigroup.com)
Date: Thu Mar 01 2007 - 20:22:31 ART
If its still not working just read NOTE: on the above link.
Split horizon should be disabled for summary to be advertized.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Digital Yemeni
Sent: Thursday, March 01, 2007 6:01 PM
To: ccieben@cox.net; cciestudy@hkbsd.com
Cc: ccielab@groupstudy.com
Subject: Re: RIP Summary Problem
your config is correct! just try this on R1,,, clear ip route *
Best Regards,
Digital
------------------------------------------------------------------------------------------------------------------
***********************************************************************************
*.* You'll NEVER succeed as a "CCIE" until you LOVE Cisco MORE than your
sleep! *.*
***********************************************************************************
I've not slept for the past 5 years and I'm expected to be busy for the next
57 years + The 5 CCIEs preparation adds on that a bit. Therefore, please be
concise on your email. Thank you!
>From: Ben <ccieben@cox.net>
>Reply-To: Ben <ccieben@cox.net>
>To: Andreson Chris <cciestudy@hkbsd.com>
>CC: ccielab@groupstudy.com
>Subject: Re: RIP Summary Problem
>Date: Thu, 01 Mar 2007 16:56:47 -0500
>
>Hi Chris,
>
>On R2, try a:
>router-rip
>no passive-interface fa0/0
>
>and see if that improves things...
>
>HTH
>Ben
>
>Andreson Chris wrote:
> > Hello GS,
> >
> > I am learning RIP recently and try create summary route to an other
> > Router. Both router are running version 2 with no summary
> >
> > R2 is trying to generate summary route to R1. However I can't find the
> > any at R1. And debug message as below. Did i do something wrong? I
> > have tried use auto aummary is work but however i can't do it via
> > interface.
> >
> > Rgds Chris.
> >
> > R2#
> > *Mar 1 00:11:59.647: RIP: sending v2 flash update to 192.168.0.1 via
> > FastEthernet0/0 (192.168.0.2)
> > *Mar 1 00:11:59.651: RIP: build flash update entries - suppressing
> > null update
> >
> > 4.0.0.0/24 is subnetted, 3 subnets
> > C 4.4.1.0 is directly connected, Loopback1
> > C 4.4.2.0 is directly connected, Loopback2
> > C 4.4.3.0 is directly connected, Loopback3
> > 192.168.0.0/30 is subnetted, 1 subnets
> > C 192.168.0.0 is directly connected, FastEthernet0/0
> >
> >
> > R2#
> >
> >
> > The design is very simple
> >
> > fa0/0 192.168.0.0/30 fa0/0
> > R1 ============R2 lo1 4.4.1.1/24
> > lo2 4.4.2.1/24
> > lo3 4.4.3.1/24
> >
> > This is R1 config
> >
> > interface FastEthernet0/0
> > ip address 192.168.0.1 255.255.255.252
> > duplex auto
> > speed auto
> > !
> > interface FastEthernet0/1
> > no ip address
> > shutdown
> > duplex auto
> > speed auto
> > !
> > router rip
> > version 2
> > network 192.168.0.0
> > no auto-summary
> > !
> > This is R2 config
> >
> > interface Loopback1
> > ip address 4.4.1.1 255.255.255.0
> > !
> > interface Loopback2
> > ip address 4.4.2.1 255.255.255.0
> > !
> > interface Loopback3
> > ip address 4.4.3.1 255.255.255.0
> > !
> > interface FastEthernet0/0
> > ip address 192.168.0.2 255.255.255.252
> > ip summary-address rip 4.0.0.0 255.0.0.0
> > duplex auto
> > speed auto
> > !
> > interface FastEthernet0/1
> > no ip address
> > duplex auto
> > speed auto
> > !
> > router rip
> > version 2
> > passive-interface default
> > network 4.0.0.0
> > network 192.168.0.0
> > neighbor 192.168.0.1
> > no auto-summary
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:49 ART