From: Scott Morris (swm@emanon.com)
Date: Thu Mar 01 2007 - 16:07:12 ART
They did away with all the smaller tests... It's a comprehensive exam now.
http://www.cisco.com/web/learning/le3/ccie/sp/comprehensive_blueprint.html
http://www.cisco.com/web/learning/le3/ccie/announcements/#spwrittenrelease
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
joshua lauer
Sent: Thursday, March 01, 2007 1:46 PM
To: Noble; Darby Weaver
Cc: Suzan S.; ccielab@groupstudy.com
Subject: Re: LAB exam SP
probably because there is no single test to qualify for the SP lab. There
are several and for each there are several references that you need. I would
start by having all the resources available for the R/S written then go from
there. Look at the blue print, from that you should be able to guage what
references you need.
JL
----- Original Message -----
From: "Noble" <noble.ccie@gmail.com>
To: "Darby Weaver" <darbyweaver@yahoo.com>
Cc: "Suzan S." <suzan_ccie@yahoo.com>; <ccielab@groupstudy.com>
Sent: Thursday, March 01, 2007 1:15 PM
Subject: Re: LAB exam SP
>I was going through the blue print and it seems that there is no
> single book to refer SP written.
>
> Can anybody recommend few good books to refer for SP written?
>
>
> On 3/1/07, Darby Weaver <darbyweaver@yahoo.com> wrote:
>> Suzan,
>>
>> Have you passed the written exam for SP?
>>
>>
>> You might want to start here:
>>
>> http://www.cisco.com/web/learning/le3/ccie/sp/index.html
>>
>> You might want to ask questions like this one here:
>>
>>
http://forums.cisco.com/eforum/servlet/NetProf?page=netprof&CommCmd=MB%3Fcmd
%3Ddisplay_location%26location%3D.1dd93d64
>>
>>
>> Watch the wrap.
>>
>>
>> --- "Suzan S." <suzan_ccie@yahoo.com> wrote:
>>
>> > Dears,
>> >
>> > Anyone knows about the lab exam, can we use the help
>> > for each command
>> > and use ? to see the following command used.
>> >
>> > Do we have to know each Rfc
>> > number and content to configure the senarios in the
>> > lab if the service
>> > requested only through the Rfc number.
>> >
>> > Thank you
>> >
>> > Regards
>> > Suzan
>> >
>>
This archive was generated by hypermail 2.1.4 : Sun Apr 01 2007 - 06:35:49 ART