From: Allan (mincisco@gmail.com)
Date: Wed Feb 28 2007 - 20:09:02 ART
I did put ip pim sparse-mode under R5 e0/0, still not work
and got another message
*Feb 28 23:19:42.135: %MROUTE-3-NO_PIM_NBR: There is no PIM neighbor on this
IDB: Ethernet0/0 -Process= "PIM Process", ipl= 0, pid= 154."
On 3/1/07, Ivan <ivan@iip.net> wrote:
>
> ip pim sparse-mode
> must be enabled on R5 e0/0
>
> On Wednesday 28 February 2007 15:37, Allan wrote:
> > Hi I tried to work with the ip multicast help-map, but fail, does
> anyone
> > know why?
> >
> >
> > ---R6 ----------- R1 ----------- R5 ---------- R4
> > serial Ethernet Ethernet
> >
> >
> > R6 Ethernet join group 239.0.0.1,
> >
> > With no transfer, R5 and R4 ping 239.0.0.1 get replied.
> >
> > after converted multicast ---> broadcast ----> multicast can't ping any
> > more
> >
> >
> >
> > R1
> >
> > interface Serial2/0
> > ip address 3.3.16.1 255.255.255.0
> > ip pim sparse-mode
> > ip multicast helper-map 239.0.0.1 3.3.15.255 105
> > encapsulation frame-relay
> > ip ospf network point-to-point
> > frame-relay map ip 3.3.16.6 106 broadcast
> > no frame-relay inverse-arp
> >
> >
> > interface Ethernet0/0
> > ip address 3.3.15.1 255.255.255.0
> > ip directed-broadcast
> >
> >
> > ip forward-protocol udp 4000
> > !
> > access-list 105 permit udp any any eq 4000
> >
> >
> > -------------
> > R5
> >
> >
> > interface Ethernet0/0
> > ip address 3.3.15.5 255.255.255.0
> > ip multicast helper-map broadcast 239.0.0.1 105
> >
> >
> > ip forward-protocol udp 4000
> > access-list 105 permit udp any any eq 4000
> >
> >
> >
> > received following message
> > Feb 28 12:38:23.398: %PIM-6-INVALID_RP_JOIN: Received (*, 239.0.0.1)
> Join
> > from 3.3.16.6 for invalid RP 3.3.6.6
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> --
> Ivan
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART