From: shank shank (shankshink@yahoo.com)
Date: Sun Feb 25 2007 - 20:48:29 ART
the other thing i noticed that the longer you let the router go in its initial setup the more idlepc values you get. actually after few times i was able to bing it down to 35 and 25%. hope this help. by the way thanks for Josh lauer for helping on the image choice stuff.
Loc Pham <ccie17030@yahoo.com> wrote: I bring it back to the GS for the benefit of the
group, hope you don't mind.
For your issue, it mean you need to get a new
idlepc for the 12.3 image ( or any ): just follow the
link.
HTH,
lP
--- shank shank wrote:
> on the IE script i went at 100% with 12.4 images.
> but as soon as i dropped the image to 12.3 it went
> down ot 45%
>
>
> ----- Original Message ----
> From: Loc Pham
> To: shank shank ; CCIE Group
>
> Sent: Sunday, February 25, 2007 12:16:12 AM
> Subject: Re: tested idlepc values for IOS images
>
>
> Shank,
> I follow the link below :
>
http://dyna-gen.sourceforge.net/tutorial.htm#_Toc151700441
> It spell out the detail very clear to me.
> I have my T60p/2G-RAM/XP drop down to less than
> 5%.
> How far have you done ?
> lP
> --- shank shank wrote:
>
> > all,\
> > i have been trying to get dynamips working wiht IE
> > script V4 R&S and i
> > can/t find a good idlepc Values. given that i
> have
> > system that is 3.4GHz and
> > 4Gb of RAM. as soon as start instances with BB
> > routers the CPU will kick up to
> > 96 - 100%. i tried using different idlepc vlues
> but
> > it would never maintain a
> > lower CPU %. does anyone know a specific image
> that
> > works better that other
> > IOS? any recommendations or thoughts? if this will
> > kill cpu wiht just thte
> > base configs how would it be when i start doing
> the
> > configurations? it would
> > probaly completely die. does anyone have this
> > working wiht any luck wiht cpu
> > utilization?
> >
>
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART