From: Ayo Richards (deji500@hotmail.com)
Date: Sat Feb 24 2007 - 06:59:43 ART
HI GS,
I have figured it out: I didn't enable ipv6 unicast-routing.
Thanks
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
deji500@hotmail.com
Sent: Saturday, February 24, 2007 9:56 AM
To: ccielab@groupstudy.com
Subject: IPV6 FRAME-RELAY CONFIG
Hi GS,
I need some help. I have a hub and spoke network (IEWB ver3 lab 12, task
7.2) with frame map statements and no inverse-arp. I can ping from hub to
spokes and from spoke to hub but I can not ping from spoke to spoke. I
checked the config thoroughly. Here is the config that I have:
R1
interface Serial0/0/0
no ip address
encapsulation frame-relay
ipv6 address 2001:CC1E:1:124::1/64
ipv6 address FE80::1 link-local
frame-relay map ipv6 FE80::2 104
frame-relay map ipv6 FE80::4 104 broadcast
frame-relay map ipv6 2001:CC1E:1:124::2 104
frame-relay map ipv6 2001:CC1E:1:124::4 104
no frame-relay inverse-arp
frame-relay lmi-type ansi
R2
interface Serial0/0/0
no ip address
encapsulation frame-relay
ipv6 address 2001:CC1E:1:124::2/64
ipv6 address FE80::2 link-local
frame-relay map ipv6 FE80::4 204 broadcast
frame-relay map ipv6 2001:CC1E:1:124::1 204
frame-relay map ipv6 2001:CC1E:1:124::4 204
frame-relay map ipv6 FE80::1 204
no frame-relay inverse-arp
frame-relay lmi-type ansi
R4 (Hub)
interface Serial0/0/0
no ip address
encapsulation frame-relay
no frame-relay inverse-arp
frame-relay lmi-type ansi
!
interface Serial0/0/0.1 multipoint
ipv6 address 2001:CC1E:1:124::4/64
ipv6 address FE80::4 link-local
frame-relay map ipv6 FE80::2 402 broadcast
frame-relay map ipv6 2001:CC1E:1:124::1 401
frame-relay map ipv6 2001:CC1E:1:124::2 402
frame-relay map ipv6 FE80::1 401 broadcast
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:48 ART