From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Wed Feb 21 2007 - 21:36:26 ART
The command reference for the 3550 states that if you don't specify a
version or if you use the 'no ip ssh version' command, then the switch
defaults to the latest version supported by the client. However, the server
(switch) supports both v1 and v2 clients.
On 2/21/07, Ronnie Angello <ronnie.angello@gmail.com> wrote:
>
> SSH operates in compatibility mode (both versions supported) if the
> command is not specified. This is the default.
>
> no ip ssh version
>
>
> On 2/21/07, Ryan Lindfield <ryan@westchasetech.com> wrote:
> >
> > Does anyone know how to, if it is possible, to make a switch support
> > both SSH V1 and SSH V2 at the same time?
> > If you try to use the "ip ssh ver 1" then " ip ssh ver 2" commands,
> > one overwrites the other. The documentations says that if you don't
> > pick on, it will automatically run the highest version, so I'm lost.
> >
> > TIA,
> > Ryan
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART