From: zesty@usa.com
Date: Wed Feb 21 2007 - 02:29:30 ART
There isn't any silver bullet that I know of. It's the nature of bugs.
Just go with your understanding & if the device acts abnormally, then
check the bug report. Sometime, you may uncover a bug that had not been
report before :-(.... Happy hunting..... This is part of the life, of
this career..... Regards, Tom
----- Original Message -----
From: "Vijay Kumar"
To: zesty@usa.com, ccielab@groupstudy.com
Subject: RE: Losing manually configured neighbors and virtual links
ospf upon reboot
Date: Tue, 20 Feb 2007 19:18:20 +0530
Hi,
One general query regarding IOS bug:
How come to know if it is some IOS bug because when looking at the
bug list
in Cisco site there is a huge list.Is there some easy way to check
the
possibility of IOS bug or some other bug.
Regards,
Vijay
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
zesty@usa.com
Sent: Tuesday, February 20, 2007 6:50 PM
To: ccielab@groupstudy.com
Subject: RE: Losing manually configured neighbors and virtual links
ospf
upon reboot
CSCse72792: OSPF: neighbor cmd rejected if VL configured. Conditions:
Virtual Link is configured. Fixed in: 12.4(11.1)
CSCsg82033: OSPF neighbor command lost after router is reloaded.
Conditions: Happens everytime when router is reload.
Workaround: Change image to 12.4.3g (GD).
----- Original Message -----
From: "Ridney Laudiano"
To: wilson@wilsonch.gotdns.com, "'Tim Curci'"
Subject: RE: Losing manually configured neighbors and virtual links
ospf upon reboot
Date: Tue, 20 Feb 2007 18:02:31 +0800
How about changing the network type to point-to-multipoint in order
to get
rid of the neighbor commands?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
wilson@wilsonch.gotdns.com
Sent: Tuesday, February 20, 2007 2:46 PM
To: Tim Curci
Cc: Tim Curci; ccielab@groupstudy.com
Subject: Re: Losing manually configured neighbors and virtual links
ospf
upon reboot
I noticed the same thing when I fired up my finished IPExpert OSPF
lab
today. I asked the GS list about not being able to set a ospf
neighbor two
days ago and the solution was to get the OSPF neighbor command to
work you
need to first remove all virutal links and then add the neighbor
commands.
If this is the case how would you keep the virtual links up after a
reboot in the real CCIE lab?
Wilson
Scott Morris explains it like this:
==========================================================================
It's more a feature than a bug. Basically it boils down to confusing
OSPF.
If your non-broadcast network is operating FIRST, then you can add
virtual-links. If you try to add VLs before it's operating, you may
find
config pieces begin to disappear.
Always check out "show ip ospf interface brief" to make sure you are
really running in non-broadcast or point-to-multipoint-non-broadcast
modes
which are the only two that take neighbor commands!
Scott
==========================================================================
> When I try to reconfigure the neighbors manually after reboot I
receive
> the
> following:
>
> OSPF: Neighbor command is allowed only on NBMA and
point-to-multipoint
> networks
>
> i.e. the router will not let me manually configure the neighbors
again.
>
>
> ----- Original Message -----
> From: "Tim Curci"
> To:
> Sent: Monday, February 19, 2007 9:48 PM
> Subject: Losing manually configured neighbors and virtual links
ospf upon
> reboot
>
>
>> Why do I keep losing manually configured neighbors over NBMA frame
>> multipoint
>> network when I reboot the DR. I have set the priority at 200 on
both hub
>> subinterfaces. Inverse ARP disabled, etc.
>>
>>
_______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
_______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART