From: Victor Cappuccio (victor@ccbootcamp.com)
Date: Wed Feb 21 2007 - 00:39:00 ART
Hi, seems to me that you have other problem different than Authentication
My betis is that you musts configure
http://www.cisco-gu.com/univercd/cc/td/doc/product/software/ios113ed/cs/csprt
n1/csrip.htm#xtocid2534115
please show us your configurations, in order to avoid the guessing
specifically:
show ip route rip
show ip proto
show ip int brief
thanks,
Victor Cappuccio.-
Network Learning Inc - A Cisco Sponsored Organization (SO) YES! We take
Cisco Learning credits!
victor@ccbootcamp.com
http://www.ccbootcamp.com (Cisco Training and Rental Racks)
http://www.ccbootcamp.com/groupstudy.html (groupstudy member discounts!)
Voice: 702-968-5100
FAX: 702-446-8012
-----Original Message-----
From: nobody@groupstudy.com on behalf of jennytan
Sent: Tue 2/20/2007 19:14
To: Cisco certification
Subject: Authentication for RIP updates - IE workbook
I am working on IPExpert workbook. R2 and R4 are enabled for RIP
authentication. Below shows the debug ip rip event. Do you see
authentication error? According to the proctor guide, I should be seeing
invalid authentication.
R2#
*Feb 21 03:25:04.708: RIP: received v2 update from 150.50.24.4 on
Serial0/0/0.24
*Feb 21 03:25:04.712: RIP: Update contains 4 routes
*Feb 21 03:25:04.712: RIP: received v2 update from 150.50.24.4 on
Serial0/0/0.24
*Feb 21 03:25:04.712: RIP: Update contains 4 routes
*Feb 21 03:25:06.460: RIP: sending v2 update to 255.255.255.255 via
FastEthernet0/0 (150.50.17.2)
*Feb 21 03:25:06.460: RIP: Update contains 14 routes
*Feb 21 03:25:06.460: RIP: Update queued
*Feb 21 03:25:06.460: RIP: Update sent via FastEthernet0/0
*Feb 21 03:25:11.228: RIP: ignored v2 update from bad source 150.50.7.5 on
FastEthernet0/0
*Feb 21 03:25:17.456: RIP: received v2 update from 150.50.9.5 on Serial0/0/1
*Feb 21 03:25:17.456: RIP: Update contains 10 routes
*Feb 21 03:25:18.332: RIP: sending v2 update to 224.0.0.9 via Loopback0 (
200.0.0.2)
*Feb 21 03:25:18.332: RIP: Update contains 17 routes
*Feb 21 03:25:18.332: RIP: Update queued
*Feb 21 03:25:18.332: RIP: Update sent via Loopback0
*Feb 21 03:25:18.332: RIP: ignored v2 packet from 200.0.0.2 (sourced from
one of our addresses)
*Feb 21 03:25:20.584: RIP: ignored v2 update from bad source 150.50.7.7 on
FastEthernet0/0
*Feb 21 03:25:20.612: RIP: sending v2 update to 224.0.0.9 via Serial0/0/1 (
150.50.9.2)
*Feb 21 03:25:20.612: RIP: Update contains 9 routes
*Feb 21 03:25:20.612: RIP: Update queued
*Feb 21 03:25:20.612: RIP: Update sent via Serial0/0/1u all
All possible debugging has been turned off
R4#
*Feb 21 03:26:01.272: RIP: ignored v2 update from bad source 150.50.17.1 on
FastEthernet0/0
*Feb 21 03:26:03.568: RIP: ignored v2 update from bad source 150.50.7.6 on
FastEthernet0/0
*Feb 21 03:26:05.240: RIP: received v2 update from 150.50.24.2 on
Serial0/0/0
*Feb 21 03:26:05.240: RIP: Update contains 15 routes
*Feb 21 03:26:08.424: RIP: ignored v2 update from bad source 150.50.17.2 on
FastEthernet0/0
*Feb 21 03:26:11.800: RIP: sending v2 update to 224.0.0.9 via Serial0/0/0 (
150.50.24.4)
*Feb 21 03:26:11.800: RIP: Update contains 13 routes
*Feb 21 03:26:11.800: RIP: Update queued
*Feb 21 03:26:11.800: RIP: Update sent via Serial0/0/0
*Feb 21 03:26:15.876: RIP: ignored v2 update from bad source 150.50.7.5 on
FastEthernet0/0
*Feb 21 03:26:19.028: RIP: ignored v2 update from bad source 150.50.7.7 on
FastEthernet0/0
*Feb 21 03:26:19.372: RIP: sending v2 update to 224.0.0.9 via Loopback0 (
200.0.0.4)
*Feb 21 03:26:19.372: RIP: Update contains 8 routes
*Feb 21 03:26:19.372: RIP: Update queued
*Feb 21 03:26:19.372: RIP: Update sent via Loopback0
*Feb 21 03:26:19.372: RIP: ignored v2 packet from 200.0.0.4 (sourced from
one of our addresses)u all
All possible debugging has been turned off
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART