From: sheherezada@gmail.com
Date: Mon Feb 19 2007 - 19:55:26 ART
1) scan-time (default 60 sec, can be tuned down to 5 sec)
2) advertise-interval (by default is 10 sec for iBGP and 30 sec for
eBGP, cand be tuned down to 0 sec)
3) any other idea?
I should add that changing these timers in a real production network
(espicially when dealing with the full table), could be a bad idea.
Mihai
CCIE #16616
On 2/18/07, ccie_sp@hotmail.com <ccie_sp@hotmail.com> wrote:
> Hi there,
>
> Does someone what options we have for BGP to detect a link failure more
> quickly then the normal hello/ holddown values. I do not mean changing the
> hello / hold time to a lower value.
>
> I know BGP fast external failover is the default for directly connected EBGP
> neighbors.. but I want a solution for IBGP and EBGP neighbors.
>
> Thanks
>
>
> _________________________________________________________________
> Probeer Live.com: jouw leven online met nieuws, sport, weer en nog veel meer.
> http://www.live.com/getstarted
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART