From: Michael Zuo (mzuo@ixiacom.com)
Date: Mon Feb 19 2007 - 19:46:25 ART
Hi group,
I tried the following to clear an access-template created by a dynamic
access list and it does not work? And the online help is
self-contradicting... very annoying...
Please help, thanks!!
R1#clear access-tem 100
% Incomplete command.
R1#clear access-tem 100 ?
% Unrecognized command
R1#clear access-tem ?
<100-199> IP extended access list
<2000-2699> IP extended access list (expanded range)
R1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(17b), RELEASE
SOFTWARE (fc2
)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Mon 06-Mar-06 22:02 by dchih
Image text-base: 0x80008098, data-base: 0x81A335C8
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
ROM: C2600 Software (C2600-J1S3-M), Version 12.3(17b), RELEASE SOFTWARE
(fc2)
R1 uptime is 19 hours, 22 minutes
System returned to ROM by reload
System image file is "flash:c2600-j1s3-mz.123-17b.bin"
cisco 2610 (MPC860) processor (revision 0x203) with 61440K/4096K bytes
of memory
.
Processor board ID JAD04510KWR (1514207935)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 Ethernet/IEEE 802.3 interface(s)
R1#
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART