From: Peter Gill (peter.gill@inxi.com)
Date: Mon Feb 19 2007 - 18:39:01 ART
When working through my labs, I've noticed the "match vlan" command is
not available in the 3560 Catalyst switches, but it is in the 3550.
What happened to it and what is the best way to do the same thing in the
3560?
See these docs:
3550 Switch:
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12225see/cr/cl
i1.htm#wp1862439
3560 Switch:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12225see/cr/
cli1.htm#wp1862439
Thanks!
Pete Gill - CCNP, CQS-CWLSS, MCSE
Consulting Engineer
INX, Inc.
1955 Lakeway Drive, Suite 220
Lewisville, Texas 75057
Office 469.549.3817
Mobile 940.206.5193
IMPORTANT/CONFIDENTIAL: This message from INX Inc. is intended only for
the use of the addressees shown above. It contains information that may
be privileged, confidential and/or exempt from disclosure under
applicable law. If you are not the intended recipient of this message,
you are hereby notified that the copying, use or distribution of any
information or materials transmitted in or with this message is strictly
prohibited. If you received this message by mistake, please immediately
email or call us collect at (469) 549-3800 and delete/destroy the
original message.
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART