From: Jian Gu (guxiaojian@gmail.com)
Date: Sat Feb 17 2007 - 18:58:22 ART
Did the VC come up after you change the configuration? What does "sh mpls l2
vc detail" say?
On 2/17/07, Dishan Gamage <dishanlg@gmail.com> wrote:
>
> Hi Group
>
> I have the Following AToM/Eompls setup
>
> CE1-------->PE1-------EoMPLS------PE3----------> CE2
>
> 1, I have a L2-cct runnnig from PE1 to PE2 , vc operational...
>
> CE1 to PE1 attachment cct is a dot1q trunk, CE2 to PE3 attachment cct is
> in
> port-mode
>
> I m using interworking type IP
>
>
> but question is, I m able to ping from CE1 to CE2 when PE3 to CE2 is
> connected directly via cross-cable.
>
> But if i use a switch in between PE3 & CE2, I configured 2 trunk-ports....
> I
> cannot ping from CE1 to CE2 or visa-versa...
>
> If I m using EoMPLS port mode do i need to directly connect PE3 to CE2
> ?
>
> Pls comment
>
> Tks in Advance
> Dishan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART