From: Scott Morris (swm@emanon.com)
Date: Sat Feb 17 2007 - 16:59:51 ART
The need for a reflector port (as the archives will show) is because the
ASICs on a 3550 are port-based. On a 3560, they're chassis-based and
therefore assigned as needed.
So dedicated ones are needed for RSPAN on a 3550, but they're already
available on a 3560, so nothing dedicated is necessary.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
johngibson1541@yahoo.com
Sent: Saturday, February 17, 2007 2:57 PM
To: ccielab@groupstudy.com
Subject: Re: Re: RSPAN question
I was wondering if 3560 needs the reflector port.
It does not.
It is really a 3550 only. The lab only has 3550 and 3560.
I am totally lost in the 2nd config option.
John
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:47 ART