From: BitGossip (bit.gossip@chello.nl)
Date: Tue Feb 13 2007 - 07:32:53 ART
Group,
According to DocCD:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3560/12235se/scg1/swv
oip.htm#wp1033944
a port connected to the cisco phone MUST be an access port and so I have
configured it as follow:
interface FastEthernet1/0/7
switchport access vlan 17
switchport mode access
switchport voice vlan 7
speed 100
duplex full
mls qos trust cos
spanning-tree portfast
end
In the WB solutions instead: 'As the default port state is dynamic, a dot1q
trunk will automatically be negotiated with the IP phone'.
This means that my config is wrong, and I should either leave the port in a
dynamic mode or in trunk mode; but this is in discordance with the DocCD ???
Thanks,
Luca.
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART