From: Ivan (ivan@iip.net)
Date: Sat Feb 10 2007 - 18:36:16 ART
First of all need to setup two bgp session r3-r1, r3-r2. Then You need down by
BGP selection proccess to nine step. Load balance can arise after this step.
Also dont forget maximum-path uder router bgp.
1) next hop reacheable
2) weight
3) loc pref
4) origin localy
5) as path
6) origin
7) med
8) ebg, ibgp
9) closest igp neighbor
10) RID
On Saturday 10 February 2007 23:42, RRC wrote:
> Hi All
>
> If i have 3 routers R1/R2/R3 and R1 & R2 are in the same BGP AS WHILE R3 is
> in another AS.If 1&2 advertised a network out of the AS to 3. How can load
> balancing be achieved for R3 via both R1 & R2 for networks linked to R1.
>
> Regards
>
> RRC
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
-- Ivan
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART