From: Scott Morris (swm@emanon.com)
Date: Sat Feb 10 2007 - 16:43:56 ART
That would assist you with limiting individual updates and how many "hops"
away they are. I took his question meaning to establish the bgp connection
to begin with since he mentioned ebgp-multihop...
So I guess it depends on whether we're talking about the connection itself,
or within the connection!
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
_____
From: Narbik Kocharians [mailto:narbikk@gmail.com]
Sent: Saturday, February 10, 2007 1:46 PM
To: Scott Morris
Cc: Dishan Gamage; Cisco certification
Subject: Re: bgp question
I don't know the entire topology and the actual question but MAYbe the "bgp
maxas-limit" can also help.
On 2/9/07, Scott Morris <swm@emanon.com> wrote:
I'd suggest looking at a neighbor command having to do with "security" and
see what kinda description may fit your need.
Or since we know that ebgp-multihop has to do with a measurement of TTL,
searching through the command reference about other things dealing with ttl
may help as well.
;)
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPexpert VP - Curriculum Development
IPexpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dishan Gamage
Sent: Friday, February 09, 2007 2:51 AM
To: Cisco certification
Subject: bgp question
Hi Group
If u are asked to
Configure PE1, such that eBGP peers farther than 3 hops away won't b able to
establish neighbor relationship until they move 2 hops away or closer to
PE1. U cannot use "ebgp-mulithop"
what commands do i need to use here ??
tks in advance
dishan
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART