From: Bob Watson (watson.robert@gmail.com)
Date: Tue Feb 06 2007 - 23:17:39 ART
none as your not advertising or redistributing any subprefix routes
from the doccd
auto-summary (BGP)
To configure automatic summarization of subnet routes into network-level
routes, use the *auto-summary* command in address family or router
configuration mode. To* *disable automatic summarization and send subprefix
routing information across classful network boundaries, use the *no* form of
this command.
On 2/6/07, Mohammad Saeed <mzsaeed@gmail.com> wrote:
>
> Hello Every Body,
>
> Can some body tell me the what differnce this no auto-summary will
> make under bgp configuration...
>
> conf t
> router bgp 100
> bgp router-id 150.1.5.5
> no synch
> neighbor 149.1.254.3 remote-as 200
> neighbor 150.1.4.4 remote-as 100
> neighbor 150.1.4.4 update-source lo0
> neighbor 150.1.4.4 route-reflector-client
> neighbor 149.1.0.6 remote-as 100
> neighbor 149.1.0.6 route-reflector-client
> neighbor 149.1.0.8 remote-as 100
> neighbor 149.1.0.8 route-reflector-client
> no auto-summary ??????
> end
> wr
>
> Regards,
>
> Mohammad Zahed Saeed
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART