From: BitGossip (bit.gossip@chello.nl)
Date: Sun Feb 04 2007 - 18:00:59 ART
Indeed,
Tnks,
L.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edison Ortiz
Sent: 04 February 2007 16:17
To: BitGossip; ccielab@groupstudy.com
Subject: Re: privilege level question
You need to enable the suboptions.
Try
privilege interface all level 10 ip address
----- Original Message -----
From: "BitGossip" <bit.gossip@chello.nl>
To: <ccielab@groupstudy.com>
Sent: Sunday, February 04, 2007 9:34 AM
Subject: privilege level question
> Hi Group,
> My task asks to modify 'privilege level 10' so that it allows modifying
> the
> ip address of interface.
>
> I think I have done it and it works for the primary address.
> The problem is that it doesn't allow me to add/del/modify a secondary
> address.
> Any idea how to achieve that as well?
> Thank,
> Luca.
>
>
> privilege interface level 10 ip address
> privilege interface level 10 ip
> privilege configure level 10 interface
> privilege exec level 10 configure terminal
> privilege exec level 10 configure
>
>
> From another session with enable 10:
>
> r6(config-if)#ip address 1.1.1.1 255.255.255.0
>
> r6(config-if)#ip address 2.2.2.2 255.255.255.0 ?
> <cr>
>
> r6(config-if)#ip address 2.2.2.2 255.255.255.0 secondary
> ^
> % Invalid input detected at '^' marker.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Mar 01 2007 - 07:38:46 ART