From: Victor Cappuccio (vcappuccio@desca.com)
Date: Tue Jan 30 2007 - 19:43:05 ART
Hi,
There is a nice link at Cisco Site
http://www.cisco.com/warp/public/473/41.html
but in general you define what Vlan should be acting as a Remote Span
Vlan using
Sw1(config-vlan)#vlan 666
Sw1(config-vlan)#remote-span ?
<cr>
Now be sure to pass that vlan over the trunk ports if using RSPAN
HTH
Victor.-
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Uchil Perera
Sent: Martes, 30 de Enero de 2007 06:30 p.m.
To: ccielab@groupstudy.com
Subject: Ingress VLAN in RSPAN/SPAN
Hi Group,
What is ingress VLAN and encapsulation in a SPAN/RSPAN destination
port.
Below is from DOC CD
monitor session session_number destination interface interface-id
[encapsulation {dot1q [ingress vlan vlan id] | isl [ingress]} | ingress
vlan vlan id]
Regards
---------------------------------
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:58 ART