From: Christopher M. Heffner (cheffner@certified-labs.com)
Date: Tue Jan 30 2007 - 15:58:51 ART
Because you put a new flash simm in the router and it is initially
empty, you have no IOS to load.
You typically would boot from the slot1: flash card as a backup and then
reload the IOS from compact flash back to the internal flash simm.
If you do not have a compact flash card for slot1: then you will have to
do a xmodem or ymodem file transfer via your terminal program into the
router's ram memory and/or flash memory.
rommon 1 > xmodem
usage: xmodem [-cyrx] <destination filename>
-c CRC-16
-y ymodem-batch protocol
-r copy image to dram for launch
-x do not launch on download completion
rommon 2 >
HTH.
Christopher M. Heffner, CCIE 8211, CCSI 98760
Strategic Network Solutions, Inc.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tandou Mohamed
Sent: Tuesday, January 30, 2007 12:18 PM
To: ccielab@groupstudy.com
Subject: boot: cannot load "flash:"
Hello GS,
i put a new 32 flash and 96 DRAM into my 3640 router. when i power the
router it goes into rommon 1> below is the message i am getting at boot
up:
===================================================================
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
PCMCIA Slot0: No Card Present
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
PCMCIA Slot1: No Card Present
System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
Copyright (c) 1999 by cisco Systems, Inc.
C3600 processor with 98304 Kbytes of main memory
Main memory is configured to 64 bit mode with parity disabled
loadprog: error - Invalid image for platform
e_machine = 43, cpu_type = 30
boot: cannot load "flash:"
==========================================================
Can anyone help here i am trying to load new IOS
Thanks,
Mohamed
---------------------------------
Bored stiff? Loosen up...
Download and play hundreds of games for free on Yahoo! Games.
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:58 ART