From: Eli Kosharovsky (eli_kosh@netvision.net.il)
Date: Sat Jan 20 2007 - 05:46:35 ART
Hi Michael,
Well, if I understood correctly you want to lower the metric. Am I correct ?
If that's what you want to do ill try to draw a scenario where a loop can be
created ( This is not present case).
Eli
-----Original Message-----
From: Michael Zuo [mailto:mzuo@ixiacom.com]
Sent: Saturday, January 20, 2007 12:39 AM
To: ??? ?????????; Liu_Liao; Darby Weaver
Cc: ccielab groupstudy
Subject: RE: RIP Metric change
Hi Eli,
Just curious, what would be the scenario that would cause the routing
loop...
thanks
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
eli_kosh@netvision.net.il
Sent: Thursday, December 21, 2006 2:04 PM
To: 'Liu_Liao'; 'Darby Weaver'
Cc: 'ccielab groupstudy'
Subject: RE: RIP Metric change
I dont think this is possible - I can think of a scenario where such a
config can create a routing loop ...
Eli
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Liu_Liao
Sent: Wednesday, December 20, 2006 5:41 PM
To: Darby Weaver
Cc: 'ccielab groupstudy'
Subject: Re: RIP Metric change
Hi All
Thanks reply
1.1.2.0 120/4
If I want change 120/4 to 120/3 and how to do?
Richard
Darby Weaver ??:
>Use an offset list would be one way.
>
>
>--- Liu_Liao <liu_liao@yahoo.com.tw> wrote:
>
>
>
>>Hi All
>>
>>R1 <--> R2 <->R3
>>R1 get route table is
>>1.1.1.0/24
>>1.1.2.0/24
>>1.1.3.0/24
>>R1 and R2 run RIPv2
>>If I want configure on R2 and show ip route folloeing 1.1.2.0 120/3
>>
>>How to do??
>>
>>Tks!
>>
>>
>>
>>
>_______________________________________________________________________
>
>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:57 ART