From: Daniel Fischer (Daniel.Fischer@gmx.net)
Date: Mon Jan 15 2007 - 11:45:06 ART
hello group
i'm having trouble with rip ipv6 and frame relay.
R5----R2 is connected through FR. Connected interfaces and Loop0 of R2 and R5 participate in RIP IPV6.
R2: int s0/0/0, R5: int s0/0.235 Multipoint
Adressing:
R2: s0/0/0: FEC0:0:0:235::2/64
lo0: FEC0:0:0:2::2/64
R5: S0/0.235: FEC0:0:0:235::5/64
lo0: FEC0:0:0:5::5/64
config R2:
ipv6 unicast-routing
interface Serial0/0/0
encapsulation frame-relay
ipv6 address FEC0:0:0:235::2/64
ipv6 enable
ipv6 rip RIP enable
frame-relay map ipv6 FEC0:0:0:235::5 205 broadcast
no frame-relay inverse-arp
interface Loopback0
ipv6 address FEC0:0:0:2::2/64
ipv6 enable
ipv6 rip RIP enable
Config R5:
ipv6 unicast-routing
interface Serial0/0.235 multipoint
ipv6 address FEC0:0:0:235::5/64
ipv6 enable
ipv6 rip RIP enable
frame-relay map ipv6 FEC0:0:0:235::2 502 broadcast
interface Loopback0
ipv6 address FEC0:0:0:5::5/64
ipv6 enable
ipv6 rip RIP enable
Frame relay is up and running for ipv4.
r2#sh ipv route FEC0:0:0:5::5 <- loopback of R5
IPv6 Routing Table - 12 entries
Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP
U - Per-user Static route
I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary
O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
R FEC0:0:0:5::/64 [120/2]
via FE80::210:7BFF:FEAE:B381, Serial0/0/0
I do have a routing table entry for network FEC0:0:0:5::/64 but i cannot reach it because the router uses the link local address which does not have frame lelay map entry (i disabled frame relay inverse arp on the interfaces).
r2#sh frame-relay map
Serial0/0/0 (up): ipv6 FEC0:0:0:235::5 dlci 205(0xCD,0x30D0), static,
broadcast,
CISCO, status defined, active
r2#ping FEC0:0:0:5::5
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to FEC0:0:0:5::5, timeout is 2 seconds:
.....
how can i get the router to use my site local addresses as nexz hop addresses? do i need to add ipv6 frame relay maps with the link local addresses?
daniel
-- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal f|r Modem und ISDN: http://www.gmx.net/de/go/smartsurfer
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART