From: Darby Weaver (darbyweaver@yahoo.com)
Date: Sun Jan 14 2007 - 00:50:58 ART
Are those DLIC's correct?
Usually most people try to map 503 to 305 not say 315
as an example.
Hmmm...
You know I always enable cdp to ensure my L2 is up and
up.
sh fram lmi -> Are your counters incrementing?
sh fram map
sh fram pvc -> What state are you in on both sides of
the cloud?
Just a few tools to help with frame relay.
How about debug output?
These tools will show you the error pretty quickly, I
would think.
Interested, let us know.
--- Victor Cappuccio <vcappuccio@desca.com> wrote:
> I think you should send more information
>
> Is the frame-relay mapping ok?
> show ip frame-relay map
>
> can you ping the other side?
> Ping 187.5.235.2/3
> Ping 224.0.0.10
>
> Do you see the corrects interfaces?
> show ip eigrp interfaces
>
> Thanks
> Victor.-
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> shank shank
> Sent: Saturday, January 13, 2007 10:27 PM
> To: CCIE Group
> Subject: Eigrp over frame relay
>
> *Mar 11 02:04:20.253: %DUAL-5-NBRCHANGE: IP-EIGRP(0)
> 10: Neighbor
> 187.5.235.3
> (Serial0/0) is down: retry limit exceeded
>
> i have confugred eigrp ove a fram
> relay link. one end of hte link is multipint
> subinterface and the other
> one is
> phisycal interface. and i was getting that message
> you see above. these
> are
> the configs
> let me know if you see what causes the problem.
> R5
>
> Interface Serial0/0
> ip address 187.5.235.5 255.255.255.0
> encapsulation frame-relay
> no ip split-horizon eigrp 10
> frame-relay map ip 187.5.235.2 502 broadcast
> frame-relay map ip 187.5.235.3 503 broadcast
> no frame-relay inverse-arp
> end
> !
> router eigrp 10
> redistribute ospf 1 metric 1 1 1 1 1
> passive-interface default
> no passive-interface Serial0/0
> no passive-interface Ethernet0/1
> network 187.5.0.0
> no auto-summary
> eigrp router-id 150.5.5.5
>
> R3
> !
> interface
> Serial1/1.235 multipoint
> ip address 187.5.235.3 255.255.255.0
> no ip split-horizon eigrp 10
> frame-relay map ip 187.5.235.2 312 broadcast
> frame-relay map ip 187.5.235.5 315 broadcast
> end
>
> interface Serial1/1
> no ip address
> encapsulation frame-relay
> no frame-relay inverse-arp
> end
>
> router eigrp 10
> redistribute ospf 1 metric 1 1 1 1 1
> passive-interface default
> no passive-interface Serial1/1.235
> network 187.5.0.0
> no auto-summary
> eigrp router-id 150.5.3.3
>
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART