From: ccie_sp@hotmail.com
Date: Wed Jan 10 2007 - 17:05:02 ART
Hi All,
I'm having problem in understanding a key thing in frame-relay adaptive
traffic shaping.If I have to do adaptive shaping,
What's the difference between:interface serial0 encapsulation frame-relay
frame-relay traffic-shaping frame-relay interface-dlci 200 class
adjust_vc_class_rate!map-class frame-relay adjust_vc_class_rate frame-relay
cir 64000 frame-relay mincir 32000 frame-relay adaptive-shaping
interface-congestion 10
AND
interface serial0 encapsulation frame-relay frame-relay traffic-shaping
frame-relay class juniperrulez frame-relay map ip 1.1.1.2 602 broadcast
frame-relay map ip 1.1.1.3 603 broadcast!map-class frame-relay juniperrulez
frame-relay cir 64000 frame-relay mincir 32000 frame-relay adaptive-shaping
interface-congestion 10
Is the only difference that in the 1st exmplme adaptive shaping is applied
only for the "602" dlci and the in second example adaptive shaping is applied
to all dlci's on the multipoint interface?
And what is the difference between ADAPTIVE shaping and normal traffic
shaping?
What does the interface-confestion doing exactly?
Thanks thanks thanks
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:56 ART