Mutlicast MVR - Can this be done on 3550 or 3560 as well as

From: Noel Debouver III (noeldebouveriii@yahoo.com)
Date: Sun Jan 07 2007 - 12:16:42 ART


SW1#show running-config Building configuration... ! mvr vlan 1200 mvr mvr group 239.9.0.1 ! ! vlan 1,1100,1200 ! interface Port-channel20 switchport trunk encapsulation isl switchport mode trunk mvr type source ! interface GigabitEthernet6/0/1 switchport access vlan 1100 mvr type receiver spanning-tree portfast ! interface GigabitEthernet7/0/49 switchport trunk encapsulation isl switchport mode trunk channel-group 20 mode active ! interface GigabitEthernet7/0/50 switchport trunk encapsulation isl switchport mode trunk channel-group 20 mode active ! interface Vlan1100 ip address 116.100.1.1 255.255.0.0 ip pim sparse-dense-mode ! interface Vlan1200 ip address 115.200.1.1 255.255.0.0 ip pim sparse-dense-mode ! ation interface Gi7/0/2 ! end

 

SW1#show mvr MVR Running: TRUE MVR multicast VLAN: 1200 MVR Max Multicast Groups: 256 MVR Current multicast groups: 1 MVR Global query response time: 5 (tenths of sec)

 

 

 

SW1#show mvr interfaces Port Type Status Immediate Leave ---- ---- ------ --------------- Gi6/0/1 RECEIVER ACTIVE/UP DISABLED Po21 SOURCE ACTIVE/UP DISABLED
 

 

 

SW1#show mvr member MVR Group IP Status Members ---------------------- --------- ------- 239.009.000.001 ACTIVE Gi6/0/1(d), Po20(s)
    MVR Mode: compatible

 __________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com



This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART