From: Xiangling (xianglingzj@gmail.com)
Date: Sun Jan 07 2007 - 05:01:38 ART
Please attach your configuration and output of "show ip route" command here.
On 1/7/07, Ming Ki Au <aurmkstr@gmail.com> wrote:
>
> Dear,
>
> Yes, my mask is exactly the same but still cannot advertise. Any idea?
>
>
> On 1/7/07, Xiangling <xianglingzj@gmail.com> wrote:
> >
> > Your net...mask... statement must match your routing table. Neither
> > subnet nor supernet is considered "match". Thus your mask used must be the
> > same as the one you put on the interface.
> >
> > On 1/7/07, Ming Ki Au < aurmkstr@gmail.com> wrote:
> >
> > > Dear all,
> > >
> > > I have tried the following, both of them are not work. But when I
> > > change the
> > > loopback interface to
> > > lo0 Ip address
> > >
> > > Ip addr 1.1.1.1 255.255.255.0 it can be distributed immediately.
> > > Can
> > > anybody tell me why?
> > >
> > > On 1/7/07, Narbik Kocharians < narbikk@gmail.com> wrote:
> > > >
> > > > There are may be many ways to accomplish that task (advertising a
> > > host
> > > > route
> > > > in BGP) here is two:
> > > >
> > > >
> > > >
> > > > 1- To advertise the loopback interface as follows:
> > > >
> > > >
> > > >
> > > > Int lo0
> > > >
> > > > Ip addr 1.1.1.1 255.255.255.255
> > > >
> > > >
> > > >
> > > > Router bgp 100
> > > >
> > > > Network 1.1.1.1 mask 255.255.255.255
> > > >
> > > >
> > > >
> > > > 1. To redistribute:
> > > >
> > > >
> > > >
> > > > Int lo1
> > > >
> > > > Ip address 10.1.1.1 255.255.255.255
> > > >
> > > >
> > > >
> > > > Access-list 1 permit host 10.1.1.1
> > > >
> > > >
> > > >
> > > > Route-map TST per 10
> > > >
> > > > Match ip addr 1
> > > >
> > > >
> > > >
> > > > Router bgp 100
> > > >
> > > > Redistribute connected route-map TST
> > > >
> > > >
> > > > On 1/6/07, Ricky MK Au < aurmk@hk1.ibm.com> wrote:
> > > > >
> > > > > Dear all,
> > > > >
> > > > > I would like to redistribute the Loopback1 address ( 200.101.3.1mask
> > > > > 255.255.255.255) into BGP but fail. Is there a special method to
> > > > > redistribute the loopback with host address into BGP? FYI, I can
> > > > > redistribute another loopback with mask 255.255.255.0.
> > > > >
> > > > >
> > > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Narbik Kocharians
> > > > CCIE# 12410 (R&S, SP, Security)
> > > > CCSI# 30832
> > > > Network Learning, Inc. (CCIE class Instructor)
> > > > www.ccbootcamp.com (CCIE Training)
> > > >
> > > >
> > > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > > _______________________________________________________________________
> > >
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> >
> >
> >
> > --
> > Thanks & Regards,
> > Xiangling
> > |-------------------------|
> > | |
> > \ I Love You All /
> > \ /
> > \___________/
>
>
>
-- Thanks & Regards, Xiangling |-------------------------| | | \ I Love You All / \ / \___________/
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART