From: Ming Ki Au (aurmkstr@gmail.com)
Date: Sun Jan 07 2007 - 01:40:14 ART
Dear all,
I have tried the following, both of them are not work. But when I change the
loopback interface to
lo0 Ip address
Ip addr 1.1.1.1 255.255.255.0 it can be distributed immediately. Can
anybody tell me why?
On 1/7/07, Narbik Kocharians <narbikk@gmail.com> wrote:
>
> There are may be many ways to accomplish that task (advertising a host
> route
> in BGP) here is two:
>
>
>
> 1- To advertise the loopback interface as follows:
>
>
>
> Int lo0
>
> Ip addr 1.1.1.1 255.255.255.255
>
>
>
> Router bgp 100
>
> Network 1.1.1.1 mask 255.255.255.255
>
>
>
> 1. To redistribute:
>
>
>
> Int lo1
>
> Ip address 10.1.1.1 255.255.255.255
>
>
>
> Access-list 1 permit host 10.1.1.1
>
>
>
> Route-map TST per 10
>
> Match ip addr 1
>
>
>
> Router bgp 100
>
> Redistribute connected route-map TST
>
>
> On 1/6/07, Ricky MK Au <aurmk@hk1.ibm.com> wrote:
> >
> > Dear all,
> >
> > I would like to redistribute the Loopback1 address (200.101.3.1 mask
> > 255.255.255.255) into BGP but fail. Is there a special method to
> > redistribute the loopback with host address into BGP? FYI, I can
> > redistribute another loopback with mask 255.255.255.0.
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
>
> --
> Narbik Kocharians
> CCIE# 12410 (R&S, SP, Security)
> CCSI# 30832
> Network Learning, Inc. (CCIE class Instructor)
> www.ccbootcamp.com (CCIE Training)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART