From: Guyler, Rik (rguyler@shp-dayton.org)
Date: Thu Jan 04 2007 - 11:43:16 ART
Okay...I interpret the requirements the other way around, meaning to use the
exact address/mask in the network statement and not meant to exactly match
only that particular interface. Bottom line: this question is a great
candidate to clarify with the proctor in the real lab if it's not worded any
better than this.
Rik
_____
From: Narbik Kocharians [mailto:narbikk@gmail.com]
Sent: Thursday, January 04, 2007 9:37 AM
To: R S
Cc: Guyler, Rik; ccielab@groupstudy.com
Subject: Re: ospf wildcard bits
I totally agree with Salau, with that configuration you are being as
specific as possible.
150.1.1.1 <http://150.1.1.1> 0.0.0.0 <http://0.0.0.0>
On 1/4/07, R S <ccie17030@yahoo.com <mailto:ccie17030@yahoo.com> > wrote:
Rik,
The routers actually complaint about it when you
create the 2nd interface that have the same subnet,
but still take the config. and works !
I remember of doing something like this with the
wicky-wicky-lab NMC/lab 3.
So if they ask for one, stick with one to be safe.
HTH,
lP
--- "Guyler, Rik" < rguyler@shp-dayton.org <mailto:rguyler@shp-dayton.org> >
wrote:
> The router won't support more than one address in
> the same subnet on two
> different interfaces. At least that used to be a
> Cisco "golden rule" and as
> far as I know, still is.
>
> I believe "network 150.1.1.1 <http://150.1.1.1> 0.0.0.255
<http://0.0.0.255> " is correct,
> which is an exact match
> between both the network statement and the
> interface.
>
> Rik
>
> -----Original Message-----
> From: nobody@groupstudy.com <mailto:nobody@groupstudy.com>
> [mailto:nobody@groupstudy.com <mailto:nobody@groupstudy.com> ] On Behalf
Of
> Salau,Olayemi
> Sent: Thursday, January 04, 2007 8:26 AM
> To: Frank
> Cc: Cisco certification
> Subject: RE: ospf wildcard bits
>
> I would use
>
>
>
> router ospf 1
>
> netwo 150.1.1.1 <http://150.1.1.1> 0.0.0.0 <http://0.0.0.0>
>
>
>
> Remember under OSPF, network command enables routing
> process on specified
> "interface", and not network.
>
> If you use 150.1.1.1 <http://150.1.1.1> 0.0.0.255 <http://0.0.0.255> ,
you're literally
> saying enable ospf on all
> interfaces within the 150.1.1.0 <http://150.1.1.0> network. What if
> there is another interface
> 150.1.1.3 <http://150.1.1.3> on this router in which you're not
> required to run OSPF on?
>
>
>
> So I would say use network 150.1.1.1 <http://150.1.1.1> 0.0.0.0
<http://0.0.0.0> area X
> in other to match
> interface exactly.
>
>
>
> Many Thanks
>
> _________________________________________________
>
> Olayemi Salau
>
> Network Analyst
>
> I.T. Solutions Division
>
> Southampton City Council
>
> ( 023 8083 4070 7 077 8811 2036 3 079 5825 7509
>
> * olayemi.salau@southampton.gov.uk
<mailto:olayemi.salau@southampton.gov.uk>
>
> _________________________________________________
>
> This e-mail is intended for the addressee only. If
> you are not the intended
> recipient, please be aware that the unauthorised use
> or disclosure of the
> information it contains, or the unauthorised copying
> or re-transmission of
> the e-mail are strictly prohibited. Such action may
> result in legal
> proceedings. If the e-mail has been sent to you in
> error, please accept our
> apologies, advise the sender as soon as possible and
> then delete the
> message. Under the Freedom of Information Act 2000 /
> Data Protection Act
> 1998, the contents of this e-mail, whether it is
> marked confidential or
> otherwise, may be disclosed. No employee, Councillor
> or agent is authorised
> to conclude by e-mail any binding agreement with
> another party on behalf of
> Southampton City Council. The Council does not
> accept service by e-mail of
> court proceedings, other processes or formal notices
> of any kind without
> specific prior written agreement. E-mails to and
> from Southampton City
> Council may be monitored in accordance with the law
>
>
>
> -----Original Message-----
> From: nobody@groupstudy.com <mailto:nobody@groupstudy.com>
> [mailto:nobody@groupstudy.com <mailto:nobody@groupstudy.com> ] On Behalf
Of
> Frank
> Sent: 04 January 2007 12:53
> To: ccielab@groupstudy.com <mailto:ccielab@groupstudy.com>
> Subject: ospf wildcard bits
>
>
>
> Hi,
>
>
>
> what does it mean if i have configure ospf network
> statements to "match
>
> the interface exaclty"?
>
>
>
> interface s0/0
>
> ip add 150.1.1.1 <http://150.1.1.1> 255.255.255.0 <http://255.255.255.0>
>
>
>
> router ospf 1
>
> netwo 150.1.1.1 <http://150.1.1.1> 0.0.0.0 <http://0.0.0.0>
>
>
>
> or
>
>
>
> router ospf 1
>
> netwo 150.1.1.1 <http://150.1.1.1> 0.0.0.255 <http://0.0.0.255>
>
>
>
> The first configuration does match the ip address
> exactly and the second
>
>
> does match the netmask directly.
>
> What should you choose. I know both are valid, but
> what would be the
>
> right one regarding to "exaclty
>
> match the interface"?
>
>
>
>
>
> Frank
>
>
>
>
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART