From: Guyler, Rik (rguyler@shp-dayton.org)
Date: Thu Jan 04 2007 - 10:47:27 ART
The second one.
When it says to match exactly, I take it to mean the OSPF network statement
should have the same mask as the interface. Both forms will work fine and
as far as I know. The only difference in functionality between the two that
I am aware of is some obscure route optimization issue on broadcast type
networks. BUT...if the lab says exact network statements then that's the
way you should configure it.
Rik
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Frank
Sent: Thursday, January 04, 2007 7:53 AM
To: ccielab@groupstudy.com
Subject: ospf wildcard bits
Hi,
what does it mean if i have configure ospf network statements to "match the
interface exaclty"?
interface s0/0
ip add 150.1.1.1 255.255.255.0
router ospf 1
netwo 150.1.1.1 0.0.0.0
or
router ospf 1
netwo 150.1.1.1 0.0.0.255
The first configuration does match the ip address exactly and the second
does match the netmask directly.
What should you choose. I know both are valid, but what would be the right
one regarding to "exaclty match the interface"?
Frank
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART