From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Wed Jan 03 2007 - 12:26:23 ART
Hi.
Could you check if R4 recognizes prefixes from R2 as valid.
Yep, some show output would be handy to have.
A.
on 1/3/2007 3:02 PM Dishan Gamage wrote:
> Hi Group
>
> I hav followin config
>
> 1. R1(AS111) --------> R2(AS112)----> (ebgp)
>
> 2. R1 injects four loopback addresses..(172.16.1.0 - 172.16.4.0) to BGP
>
> 3. R2 receives the four loopback address (sh ip bgp is ok!) (R2 is a
> RR-client in AS112)
>
> 4. R4 which is the only RR in AS112 is also receiving the four loopback id's
> (i.e R2, R5, R6 are clients in AS112)
>
> **** ---> my problem is that R5, and R6 are not receiving the loopback
> address of R1. ?? (in the bgp table)
>
> but when i create a loopback on R4, it propages to R5, R6 no issue ......
>
> all my bgp states are establish ...
>
> pls help
>
> cheers
> Dishan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART