From: Victor Cappuccio (vcappuccio@desca.com)
Date: Wed Jan 03 2007 - 11:40:42 ART
Hi Dishan,
Can you show us the following?
ter le 0
Show ip bgp sum
Show ip bgp neigh
Show ip bgp
Show run | b router bgp
For all routers?
Thanks
Victor.-
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Dishan Gamage
Sent: Wednesday, January 03, 2007 10:03 AM
To: Cisco certification
Subject: bgp table not showing routes on RR-clients
Hi Group
I hav followin config
1. R1(AS111) --------> R2(AS112)----> (ebgp)
2. R1 injects four loopback addresses..(172.16.1.0 - 172.16.4.0) to BGP
3. R2 receives the four loopback address (sh ip bgp is ok!) (R2 is a
RR-client in AS112)
4. R4 which is the only RR in AS112 is also receiving the four loopback
id's
(i.e R2, R5, R6 are clients in AS112)
**** ---> my problem is that R5, and R6 are not receiving the loopback
address of R1. ?? (in the bgp table)
but when i create a loopback on R4, it propages to R5, R6 no issue
......
all my bgp states are establish ...
pls help
cheers
Dishan
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART