From: Dan C (cdan2154@gmail.com)
Date: Tue Jan 02 2007 - 23:32:14 ART
Hi Dishan,
There is a buffer tuning tool on cisco's web site more info at :
http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a00800a7b80.shtml
sh proc mem taken few times over a period of time will show if you are
facing any memory leak in your routers, will be best if you could reload and
monitor before making any changes to buffers.
Cheers,
Dan
On 1/3/07, Dishan Gamage <dishanlg@gmail.com> wrote:
>
> Hi Group
>
> I have a question reg buffers
>
> if a question asks you to set for serial 0/0/0
>
> 1. no of temp buffers allocated to system is 100
> 2. min no of free buffers to 50
>
> i tried the following config
>
> R6(config)#buffers ser
> R6(config)#buffers serial 0/0/0 i
> R6(config)#buffers serial 0/0/0 ?
> initial Temporary buffers allocated at system reload
> max-free Maximum number of free buffers
> min-free Minimum number of free buffers
> permanent Number of permanent buffers
>
> R6(config)#buffers serial 0/0/0 in
> R6(config)#buffers serial 0/0/0 initial ?
> <0-65536> Number of buffers
>
> R6(config)#buffers serial 0/0/0 initial 100 ?
> <cr>
>
> R6(config)#buffers serial 0/0/0 initial 100
> %Serial0/0/0 is a static pool and cannot be tuned
> R6(config)#
> R6(config)#
> R6(config)#buffers serial 0/0/0 min
> R6(config)#buffers serial 0/0/0 min-free 50
> %Serial0/0/0 is a static pool and cannot be tuned
> R6(config)#
>
> I m running c2800nm-adventerprisek9-mz.124-8a.bin"
>
> How can i set the above buffer values ??
>
> reg
> Dishan
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Feb 08 2007 - 23:46:55 ART