From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Sun Dec 31 2006 - 10:46:45 ART
Thanks :)
On 12/31/06, Hough, Earl <Earl.Hough@sarcom.com> wrote:
>
> Farrukh,
>
>
>
> This is the email I received back from Cisco when I posed the question to
> them regarding what version of OS would be used in the lab.
>
>
>
>
>
> >Hello Earl,
>
>
>
> >It will be 7.2x
>
>
>
> >regards,
>
> >Tong Ma
>
> >CCIE Program
>
>
>
>
>
> *Earl Hough*
>
> CCIE #16508
>
>
> ------------------------------
>
> *From:* Kal Han [mailto:calikali2006@gmail.com]
> *Sent:* Saturday, December 30, 2006 9:36 PM
> *To:* Farrukh Haroon
> *Cc:* Hough, Earl; V Shekhar; Groupstudy; Cisco certification
> *Subject:* Re: ASA & L2TP/PPT
>
>
>
> They are going to use 7.2 code.
>
> Its guaranteed.
>
>
>
>
> On 12/30/06, *Farrukh Haroon* <farrukhharoon@gmail.com> wrote:
>
> Hello Earl,
>
> thanks for that very useful info, but can you please point to the exact
> location on the Cert Online Support Tool page that pertains to this...
>
> Thanks
>
> On 12/30/06, Hough, Earl <Earl.Hough@sarcom.com> wrote:
> >
> > Everyone,
> >
> > I posted this very question to the Certifications Online Support tool
> > and was told that the PIX and the ASA devices would be using 7.2.x code.
> >
> > Earl Hough
> > CCIE #16508
> >
> > ________________________________
> >
> > From: nobody@groupstudy.com on behalf of V Shekhar
> > Sent: Sat 12/30/2006 12:10 AM
> > To: Farrukh Haroon
> > Cc: Groupstudy; Cisco certification
> > Subject: Re: ASA & L2TP/PPT
> >
> >
> >
> > yes, you are correct in saying that 7.2 supports L2TP with IPSEC, but i
> > it
> > likely that the security LAB will be using 7.2 code?
> > I am assuming that CCIE
> > folks do not prefer to use the latest code immediately in LAB. They
> > *might*
> > use 7.0 or 7.1.
> > Any Ideas?
> >
> > Thanx,
> > -sHekHar.
> > CCSP/CISSP/RHCE.
> >
> > -----
> > Original Message ----
> > From: Farrukh Haroon < farrukhharoon@gmail.com>
> > To: V
> > Shekhar <vshekhar25@yahoo.com>
> > Cc: Groupstudy <security@groupstudy.com >; Cisco
> > certification <ccielab@groupstudy.com>
> > Sent: Saturday, December 30, 2006
> > 10:25:14 AM
> > Subject: Re: ASA & L2TP/PPT
> >
> > Shekhar, L2TP (over IPSEC) support
> > was put back into PIX 7.2.X release (it was not there in 7.0 and 7.1
> > releases
> > I think) , this is a sample configuration from CCO:
> > http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configura
> > tion_
> > example09186a00807213a7.shtml
> >
> >
> > On 12/30/06, V Shekhar <
> > vshekhar25@yahoo.com>
> > wrote:Just wanted make sure that ASA does not support L2TP & PPTP.
> >
> > Does this
> > mean L2TP & PPTP is only tested against 3K?
> >
> > Any thoughts?
> >
> > Thanx,
> > -sHekHar.
> > CCSP/CISSP/RHCE.
> >
> >
> >
> >
> > __________________________________________________
> > Do You
> > Yahoo!?
> >
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of
> > spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> > _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> _
> > _
> >
> > The information contained in this transmission is confidential. It is
> > intended solely for the use of the individual(s) or organization(s)
> > to whom it is addressed. Any disclosure, copying or further distribution
> > is not permitted unless such privilege is explicitly granted in
> > writing by SARCOM, Inc. Furthermore, SARCOM, Inc. is not responsible for
> > the proper and complete transmission of the substance
> > of this communication, nor for any delay in its receipt.
>
>
>
>
>
>
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>
>
> The information contained in this transmission is confidential. It is intended solely for the use of the individual(s) or organization(s)
>
> to whom it is addressed. Any disclosure, copying or further distribution is not permitted unless such privilege is explicitly granted in
>
> writing by SARCOM, Inc. Furthermore, SARCOM, Inc. is not responsible for the proper and complete transmission of the substance
> of this communication, nor for any delay in its receipt.
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:40 ART