From: Ronnie Angello (ronnie.angello@gmail.com)
Date: Sun Dec 31 2006 - 00:45:06 ART
Try the 'private-vlan host-association' command on your promiscuous port
too.
On 12/19/06, elias.chari@gmail.com <elias.chari@gmail.com> wrote:
>
> Hi GS,
>
> Has anybody tried making an svi talk to members of community and isolated
> vlans?
>
> Whilst I have managed to get it to work as per documentation when a router
> is connected to a promiscuous port, I have issues with the SVI.
>
> Any ideas?
>
> Thanks
>
> Relevant config below
>
> vlan 10
> private-vlan primary
> private-vlan association 20,30
> !
> vlan 20
> private-vlan community
> !
> vlan 30
> private-vlan isolated
> !
> interface FastEthernet0/1
> switchport private-vlan mapping 10 20,30
> switchport mode private-vlan promiscuous
> spanning-tree portfast
> !
> interface FastEthernet0/2
> switchport private-vlan host-association 10 20
> switchport mode private-vlan host
> spanning-tree portfast
> !
> interface FastEthernet0/4
> switchport private-vlan host-association 10 20
> switchport mode private-vlan host
> spanning-tree portfast
> !
> interface FastEthernet0/6
> switchport private-vlan host-association 10 30
> switchport mode private-vlan host
> spanning-tree portfast
>
> interface Vlan10
> ip address 157.1.14.10 255.255.255.0
> private-vlan mapping 20,30
> !
> Switch#sh vtp status | inc Tr
> VTP Operating Mode : Transparent
>
> Switch#sh ver | inc Ver
> Cisco IOS Software, C3560 Software (C3560-ADVIPSERVICESK9-M), Version 12.2(25)SEE2,
> RELEASE SOFTWARE (fc1)
> BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE
> SOFTWARE (fc4)
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:40 ART