From: Thiago Vazquez (thiago.vazquez@uk.easynet.net)
Date: Sat Dec 30 2006 - 22:13:26 ART
Did u try a shut / no shut on both sides on the link ?
After that if link still down, check with show int if the speed and duplex are really set to 100 / full on both sides as I've seen a bug on the 3750s where one side goes to 100/half after a bounce on the link.
Cheers, Thiago
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of M
S
Sent: 31 December 2006 00:34
To: groupstudy@cconlinelabs.com; bob@bobsinclair.net;
ccielab@groupstudy.com
Subject: RE: speed/duplex on 3560
Yes,
I did it on both sides.
interface range fas 0/13 - 15
switch trunk encap dot
switch mode trunk
speed 100
duplex full
I did too other things. switch nonegotiate and no swit nonegotiate
Mike
--------------------------------------------------------------------
From: "Tony Schaffran" <groupstudy@cconlinelabs.com>
Reply-To: <groupstudy@cconlinelabs.com>
To: "'M S'"
<michaelgstout@hotmail.com>,<bob@bobsinclair.net>,<ccielab@groupstudy.com>
Subject: RE: speed/duplex on 3560
Date: Sat, 30 Dec 2006 16:28:23 -0800
Did you set the speed and duplex on each device on both sides of the
trunk
link?
Tony Schaffran
Network Analyst
CCIE #11071
CCNP, CCNA, CCDA,
NNCDS, NNCSS, CNE, MCSE
www.cconlinelabs.com
Your #1 choice for online Cisco rack rentals.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of M S
Sent: Saturday, December 30, 2006 3:43 PM
To: bob@bobsinclair.net; ccielab@groupstudy.com
Subject: RE: speed/duplex on 3560
This is what I did
sw tr en do
sw mo tr
speed 100
dup full
Then I added mdix auto and no mdix auto to try to bring the links up
(incase they weren't crossovers) The links showed up as not
connected.
--------------------------------------------------------------------
From: "Bob Sinclair" <bob@bobsinclair.net>
To: "'M S'" <michaelgstout@hotmail.com>,<ccielab@groupstudy.com>
Subject: RE: speed/duplex on 3560
Date: Sat, 30 Dec 2006 18:27:24 -0500
Mike,
I am able to hard code various speed and duplex settings on my 3560s
and
still trunk. Are you setting the same values on both sides of the
link?
Are you trunking to a router or another 3560?
Bob Sinclair
CCIE 10427 CCSI 30427
www.netmasterclass.net
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of M S
Sent: Saturday, December 30, 2006 6:03 PM
To: ccielab@groupstudy.com
Subject: speed/duplex on 3560
Hello:
Does anybody know why you can't lock in the speed and duplex settings
on
the Cisco 3560?
I just tryed to condigure some trunks and the links would not come up
with the speed and duplex sett to 100 / full. I tried different
combinations of no mdix auto and that didn't help. Thanks.Mike
------------------------------------------------------------------------
Fixing up the home? Live Search can help
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
------------------------------------------------------------------------
Experience the magic of the holidays. Talk to Santa on Messenger.
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
------------------------------------------------------------------------
The MSN Entertainment Guide to Golden Globes is here. Get all the scoop.
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:40 ART