From: Scott Morris (swm@emanon.com)
Date: Sat Dec 30 2006 - 11:56:42 ART
Well... The absolute time would be based on when the address is learned.
The inactivity time would be based on when traffic was last received from
that learned address.
HTH,
Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE
#153, CISSP, et al.
CCSI/JNCI-M/JNCI-J
IPExpert VP - Curriculum Development
IPExpert Sr. Technical Instructor
smorris@ipexpert.com
http://www.ipexpert.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of JB
Sent: Saturday, December 30, 2006 4:15 AM
To: Ronnie Angello
Cc: ccielab@groupstudy.com
Subject: Re: switchport port-security aging time
Hi, Thanks for the reply. Would any event start this aging process or is it
as soon as the mac address is learned? I see there are 2 options absolute
<default> and inactivity.
JB
On 12/29/06, Ronnie Angello <ronnie.angello@gmail.com> wrote:
> It would set the aging time for all secure addresses on the port.
>
>
> On 12/29/06, JB <jellyboy@gmail.com> wrote:
> >
> > Hi All, I'm a bit stuck on this one- what the switchport
> > port-security aging time command does exactly? I am thinking along
> > the lines of it being used:
> >
> >
> > interface FastEthernet0/7
> > switchport access vlan 5
> > switchport mode access
> > switchport port-security
> > switchport port-security maximum 2
> > switchport port-security aging time 1
> >
> > This would allow 2 macs to be allowed on port 7. If one mac was
> > deleted, then then another could be learned after an absolute time
> > of
> > 1 minute. Am I correct or got the functionality way off the mark?
> >
> > TIA,
> >
> > JB
> >
> >
> ______________________________________________________________________
> _
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:40 ART