From: Gavin Lawson (GavinL@titan.net.au)
Date: Sat Dec 30 2006 - 06:37:49 ART
The question asks to put traffic with an ip precedence value or cos
value of 5, 6 and 7 in the priority queue.
With 3550's this can be done on the interface with.
Int fa0/23
priority-queue out
wrr-queue cos-map 4 5 6 7
I then verify this by using
sh mls qos int fa0/23 queuing
With 3560's I have used the global command and enabled the priority
queue on the interface.
mls qos srr-queue output cos-map queue 1 threshold 3 5 6 7.
int fa0/23
priority-queue out
But I can not find the show command to prove that ip precedence value or
cos value of 5, 6 and 7 are in the priority queue.
As the output below doesn't tell me what values are mapped to what queue
for this interface?
Cat3560-1#sh mls qos int fa0/23 queueing
FastEthernet0/23
Egress Priority Queue : enabled
Shaped queue weights (absolute) : 10 0 0 0
Shared queue weights : 10 10 60 20
The port bandwidth limit : 100 (Operational Bandwidth:100.0)
The port is mapped to qset : 1
Any help?
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:39 ART