From: Marvin Greenlee (marvingreenlee@yahoo.com)
Date: Sat Dec 30 2006 - 02:22:38 ART
In the past, the stated policy has been that features
need to be available for 6 months before they would be
tested in the lab.
7.2.2 shows a release date of 11/22/2006, where 7.2.1
shows a release date of May 31 2006.
I see no reason why 7.2 could not be loaded on the
devices in the lab.
--- V Shekhar <vshekhar25@yahoo.com> wrote:
> yes, you are correct in saying that 7.2 supports
> L2TP with IPSEC, but i it
> likely that the security LAB will be using 7.2 code?
> I am assuming that CCIE
> folks do not prefer to use the latest code
> immediately in LAB. They *might*
> use 7.0 or 7.1.
> Any Ideas?
>
> Thanx,
> -sHekHar.
> CCSP/CISSP/RHCE.
>
> -----
> Original Message ----
> From: Farrukh Haroon <farrukhharoon@gmail.com>
> To: V
> Shekhar <vshekhar25@yahoo.com>
> Cc: Groupstudy <security@groupstudy.com>; Cisco
> certification <ccielab@groupstudy.com>
> Sent: Saturday, December 30, 2006
> 10:25:14 AM
> Subject: Re: ASA & L2TP/PPT
>
> Shekhar, L2TP (over IPSEC) support
> was put back into PIX 7.2.X release (it was not
> there in 7.0 and 7.1 releases
> I think) , this is a sample configuration from CCO:
>
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_
> example09186a00807213a7.shtml
>
>
> On 12/30/06, V Shekhar <
> vshekhar25@yahoo.com>
> wrote:Just wanted make sure that ASA does not
> support L2TP & PPTP.
>
> Does this
> mean L2TP & PPTP is only tested against 3K?
>
> Any thoughts?
>
> Thanx,
> -sHekHar.
> CCSP/CISSP/RHCE.
>
>
>
>
> __________________________________________________
> Do You
> Yahoo!?
>
> Tired of spam? Yahoo! Mail has the best spam
> protection around
> http://mail.yahoo.com
>
This archive was generated by hypermail 2.1.4 : Tue Jan 02 2007 - 07:50:39 ART